{"count":1,"message":"Results returned successfully","results":[{"odiNumber":10110705,"manufacturer":"General Motors, LLC","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"02/11/2005","dateComplaintFiled":"02/17/2005","vin":"","components":"TRAILER HITCHES","summary":"I OWN A 2004 CHEVY SILVERADO 2500HD. ON 11 FEB 2005 I NOTICED SOME RUST ON MY TRAILER HITCH. I INSPECTED IT AND FOUND THAT THERE IS RUST AROUND THE WELDS, AND THAT ONE OF THE WELDS IS COMPLETELY CRACKED. I WENT TO THE DEALER AND WAS TOLD THAT THE ONLY FIX IS TO RE-WELD IT. I TOLD THEM THAT I DID NOT WANT IT WELDED, I WANTED IT REPLACED. THIS IS A WARRANTY ITEM. I FEEL THAT IF THE ORIGINAL ROBOTIC WELDS WERE NOT HOLDING, THEN WHY WEAKEN THE METAL MORE BY HEATING IT UP AGAIN AND RE-WELDING IT. I EXPRESSED MY CONCERN THAT IF THE HITCH WAS RE-WELDED, AND IT FAILED WHILE I WAS TOWING AND CAUSED A SERIOUS ACCIDENT WHO WOULD TAKE RESPONSIBILITY. NO ANSWER ON THAT QUESTION. I HAVE RESEARCHED ON THE INTERNET AND FOUND THAT THERE ARE SEVERAL PEOPLE THAT HAVE HAD THIS PROBLEM, AND JUST REPLACED IT WITH AN AFTER MARKET HITCH. I HAVE ALSO SEEN THE PICTURES OF A SERIOUS ACCIDENT CAUSED BY A GM HITCH FAILURE. AS OF RIGHT NOW, I DO NOT HAVE A SOLUTION TO THIS PROBLEM OTHER THAN THE DEALERSHIP WILL NOT REPLACE THIS GM INSTALLED, UNDER WARRANTY HITCH. THE DEALERSHIP WANTS TO RE-WELD IT. I THINK THIS CAN BE A SERIOUS SAFETY ISSUE DUE TO THE FACT THAT MOST PEOPLE DO NOT TAKE THE TIME TO INSPECT THERE TRAILER HITCHES, AND JUST HOOK UP AND TAKE THERE FAMILY OUT FOR A WEEKEND TRIP PULLING THERE TRAVEL TRAILERS. I WILL CONTINUE TO TRY AND WORK WITH GM AND THE DEALERSHIP TO GET THIS PROBLEM SOLVED.   *JB","products":[{"type":"Vehicle","productYear":"2004","productMake":"CHEVROLET","productModel":"SILVERADO","manufacturer":"General Motors, LLC"}]}]}