{"count":1,"message":"Results returned successfully","results":[{"odiNumber":10216617,"manufacturer":"UNKNOWN MANUFACTURER","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"01/31/2008","dateComplaintFiled":"01/31/2008","vin":"","components":"CHILD SEAT","summary":"EVENFLO MODEL # 5931473 N1    MANUFACTURED 14 MAY 04  THERE HAS BEEN NO ACCIDENT RELATED TO THIS CARSEAT'S FAILURES.  THE NUMBER OF FAILURE'S IS UNKNOWN.   I AM SUBMITTING A COMPLAINT REGARDING THIS CARSEAT'S FAILURE TO WORK PROPERLY AND AS ADVERTISED, SO THAT SOMEONE ELSE USING THIS MODEL WILL NOT SUSTAIN INJURIES IF AN ACCIDENT OCCURS.    AFTER USING THIS CARSEAT FOR A SHORT TIME, I ASSUMED THE CAR SEAT WAS LOCKED INTO PLACE UPON PUTTING INTO THE BASE BECAUSE THERE WAS A CLICKING SOUND AND I COULD NOT LIFT THE CARSEAT OUT FROM THE BASE WHEN DOUBLE-CHECKING.  HOWEVER, WHEN DRIVING, USUALLY TURNING A CORNER OR HITTING A BUMP, THERE WILL OFTEN BE ANOTHER LOUD CLICKING SOUND HEARD AS THE CARSEAT DOES ACTUALLY LOCK INTO THE BASE.  THERE IS REALLY NO CLEAR WAY TO INDICATE THAT THE CAR SEAT HAS LOCKED INTO THE BASE WHEN INSTALLING IT.  I HAVE TRIED PUSHING WITH ALL MY WEIGHT TO GET THE CARSEAT TO LOCK INTO THE BASE, AND EVEN THEN IT ONLY LOCKS HALF THE TIME.  ONLY IF I PULL THE SECONDARY RELEASE ON THE BASE AND THEN PUSH THE CARSEAT FURTHER INTO THE BASE WILL IT SEEM TO FULLY LOCK INTO PLACE.  THE REVERSE IS TRUE WHEN TRYING TO REMOVE THE CARSEAT FROM THE BASE AS THE PRIMARY RELEASE USUALLY DOES NOT WORK PROPERLY.  I USUALLY END UP NEEDING TO USE THE SECONDARY BASE RELEASE TO REMOVE THE CARSEAT FROM THE BASE. HOWEVER, BECAUSE OF THE WEIGHT OF THE CHILD AND THE DIFFICULTY IN PULLING THE RELEASE (IT USUALLY TAKES TWO HANDS TO PULL IT WITH ENOUGH FORCE TO MAKE IT RELEASE), IT IS SOMETIMES NECESSARY TO TAKE THE CHILD OUT OF THE CARSEAT FIRST, REMOVE  THE ENTIRE CARSEAT AND BASE FROM THE VEHICLE, TURN IT UPSIDE DOWN, AND THEN RELEASE IT FROM UNDERNEATH.  I HAVE SPOKEN TO EVENFLO AND THEIR RESPONSE WAS THAT NOTHING COULD BE DONE TO RECTIFY THE SITUATION AS THE WARRANTY WAS EXPIRED AND THE MODEL HAS BEEN DISCONTINUED.  I WAS ADVISED TO DISCONTINUE USING THE BASE AND JUST USE THE CAR SEAT ALONE.  *TR","products":[{"type":"Vehicle","productYear":"9999","productMake":"UNKNOWN","productModel":"UNKNOWN","manufacturer":"UNKNOWN MANUFACTURER"},{"type":"Child Seat","productYear":"9999","productMake":"EVENFLO","productModel":"375 (PORT ABOUT 5)","manufacturer":"Evenflo Company, Inc."}]}]}