{"count":1,"message":"Results returned successfully","results":[{"odiNumber":10228929,"manufacturer":"General Motors, LLC","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"05/23/2008","dateComplaintFiled":"05/26/2008","vin":"2CNBJ13C8X6","components":"STRUCTURE","summary":"'99 CHEVY TRACKER. RUST FROM INSIDE THE METAL TO INNER& OUTER SURFACES. THE DOORS, ROCKERS PANELS & INTO THE FLOOR PLATE, WINDOW FRAMES & DOOR EDGES.  BOUGHT THIS VEHICLE USED,3WEKS AGO,  BUT LOOKING ALMOST NEW INSIDE & OUT. THERE WAS  TO THE EYE ONLY SOME SLIGHTLY BUBBLED PAINT IN 8 SPOTS  DECIDE TO GET RIGHT ON IT  STARTED TO EMEORY CLOTH IT & FOUND THAT A LITTLE PUSH ,PARTICULARLY THE ROCKER PANELS, WOULD GO COMPLETELY THROUGH TO THE INNER SURFACE. BOTH ROCKER PANELS FRONT TO REAR WERE THE SAME. SO I USED MY GRINDER TO CUT THEM OPEN TO SEE HOW FAR I WOULD HAVE TO GO TO GET PAST THE RUST.  ONCE I GOT THE PANELS OPEN I COULD SEE THAT THE CORROSION WENT CLEAR INTO THE FLOOR PANELS. I THEN DECIDED 2 HIT THE SPOTS ON THE DOORS FOUND BASICALLY THE SAME THING. THEN LOOKING ON THE INTERNET FOUND OUT G>M>  WAS REPAIRING AND REIMBURSING OWNERS FOR IMPROPERLY TREATED TREATING FRAME & CROSS MEMBERS WHICH ARE RUSTING THROUGH. ALSO REPLACING CORRODED HARDWARE EVERYWHERE IT IS FOUND ON THESE VEHICLES FROM '99 TO 2004.   THIS BODY RUST SEEMS TO BE THE SAME THING. DANGEROUS?  IF THE SERIOUSLY WEAKEND ROCKERS & FLOOR PLATE WERE STRUCK AT EVEN A LOW SPEED I DO NOT DOUBT THAT  ANY PERSON IN THIS VEHICLE WOULD SUFFER CRUSH INJURIES. THIS IS REMINISCENT OF THE 70'S & 80'S WHEN GM WAS USING HEAVILY CORRODED METAL TO BUILD VEHICLES. & CREATED UNSAFE & EXPENSIVE CONDITIONS FOR THE CONSUMERS & LOST A GOOD PORTION OF THE CAR MARKET TO FOREIGN MANUFACTURERS.   I HAVE  SEVERAL PICTURES I CAN SEND YOU. PLEASE ADVISE.  SINCERELY  DAN CHURCH  *TR","products":[{"type":"Vehicle","productYear":"1999","productMake":"CHEVROLET","productModel":"TRACKER","manufacturer":"General Motors, LLC"}]}]}