{"count":1,"message":"Results returned successfully","results":[{"odiNumber":10246723,"manufacturer":"Chrysler (FCA US, LLC)","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"05/09/2008","dateComplaintFiled":"10/26/2008","vin":"","components":"STEERING,SUSPENSION","summary":"FACTORY STRUTS(SUSPENSION) ARE INADEQUATE TO SUPPORT THE WEIGHT OF THE VEHICLE. MY STRUT MOUNT/PLATE &BOLTS BROKE AT 55 MILE PER HOUR & THE STRUT WENT THROUGH THE STRUT HOUSING/PLATE. THE STEERING/SUSPENSION SYSTEM IS COMPLETELY AFFECTED WHEN THE STRUTS BEGIN TO FAIL ON ALL VEHICLES. WHEN STRUTS FAIL SPRINGS ALSO FAIL CAUSING EVEN MORE STRESS ON THE OTHER STEERING/SUSPENSION PARTS(ALL BUSHINGS, TIE RODS. CONTROL ARMS, BALL JOINTS, CV JOINTS, TRANSAXLE, SWAY BAR.    I HOPE IM MAKING SENSE, THIS NEEDS SERIOUS EXAMINATION AS CLUNK/ BUMP NOISES EVERY INTREPID ARE BAD STRUTS OR BAD STRUT MOUNT/BOLTS WHICH IMMEDIATELY INDICATE YOUR SUSPENSION/STEERING SYSTEM IS BEING BANGED UP.    THE INNER TIE ROD BOLTS IN STEERING RACK BACK OUT OR TRY TO DUE TO TORN BUSHINGS IN THE INNER TIE RODS AT THE STEERING RACK CENTER. THESE BUSHINGS TEAR DUE TO WORN STRUTS THAT PUT STRESS ON TIE RODS    SWAY BAR& STEERING RACK MOUNT BUSHINGS BOTH COMPRESS WITH THE EXTRA STRESS OF FAILING STRUTS.    STEERING RACK SHIFTS DUE TO BAD INNER TIE ROD BUSHINGS CAUSING PLAY IN YOUR TIE RODS AND THE STEERING RACK MOUNT BUSHINGS NOW COMPRESSED CAUSE THE RACK TO SHIFT ALSO. SAME WITH SWAY BAR BUSHINGS&ANY OTHER SUSPENSION PARTS AND STEERING WHEN THIS HAPPENS SUCH AS INNER TIE RODS, OUTER TIE RODS, CV JOINTS, TRANSAXLE, BALL JOINTS,ALL BUSHINGS,LINKAGES,MOUNTS,CRADLE    CAR WAS BUILT DEFECTIVELY AS THE WEIGHT OF THE VEHICLE IS TOO MUCH FORCE FOR THE STRUTS THAT COME FACTORY INSTALLED. THERE NEEDS TO BE AN IMMEDIATE CALL BACK ON THE STRUTS WITH A SERVICE ORDER TO EXAMINE AND REPAIR TORN OR COMPRESSED BUSHINGS IN THE INNER TIE RODS/STEERING RACK MOUNTING/SWAY BAR/BALL JOINT/CONTROL ARM/OUTER TIE ROD/ALONG WITH ANY DAMAGE TO THE CV JOINT&TRANSAXLES DUE TO THE DESIGN DEFECT USING INADEQUATE STRUTS FOR THE VEHICLES WEIGHT!    THIS MAY SEEM LIKE AN EXTREME REQUEST BUT SINCE THEY WERE NEGLIGENT  TO NEVER REPORT THE INADEQUACY OF THE STRUTS VS DESIGN IN ALL THE COMPLAINTS ON STEERING/SUSPENSION A RECALL IS IN ORDER.  *TR","products":[{"type":"Vehicle","productYear":"1995","productMake":"DODGE","productModel":"INTREPID","manufacturer":"Chrysler (FCA US, LLC)"}]}]}