{"count":1,"message":"Results returned successfully","results":[{"odiNumber":10405872,"manufacturer":"UNKNOWN MANUFACTURER","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"06/10/2011","dateComplaintFiled":"06/10/2011","vin":"","components":"CHILD SEAT","summary":"THIS IS ABOUT THE SAFETY 1ST COMPLETE AIR SE SEAT, MODEL NUMBER CC051-AIR.    THIS SEAT IS IMPOSSIBLE TO INSTALL REAR FACING ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS. THE INSTRUCTIONS SAY THAT THE SEAT NEEDS TO BE INSTALLED AT EXACTLY A 45 ANGLE,AND THAT THE LINE ON THE SEAT MUST BE PARALLEL WITH THE GROUND. THE LINE ON THE SIDE OF THE SEAT PUTS THE SEAT AT A 50 INCLINE, NOT A 45 INCLINE. I CAREFULLY MEASURED THE ANGLES ON A SURFACE WHICH I VERIFIED TO BE LEVEL, AND THIS CONFIRMED WHAT I ALREADY HAD FOUND OUT WHEN TRYING TO INSTALL THE SEAT IN MY CAR.  FURTHERMORE, EVEN AT 45 THE SEAT CANNOT POSSIBLY FIT REAR-FACING IN THE BACK SEAT OF ANY CAR WITHOUT PUTTING THE FRONT SEAT TOO CLOSE TO THE AIR BAG. IT IS TOO TALL TO INSTALL AT SUCH A STEEP ANGLE. I AM USING THE SEAT IN A 2000 CHEVY SUBURBAN AND THERE AREN'T MANY CARS ON THE MARKET WITH MORE ROOM THAN A SUBURBAN!!    THE SEAT ALSO CLAIMS TO BE USABLE FOR A CHILD AS SMALL AS 5 LBS AND 19\" LONG, BUT REQUIRES THAT THE CHILD'S SHOULDER HEIGHT BE AT LEAST 10.5\", WHICH MEANS THE ONLY 19\" TALL INFANT TO FIT THE SEAT WOULD HAVE TO BE ONE WITH ITS LOWER LEGS AMPUTATED; AND NO CHILD WEIGHING ONLY 5 LBS WOULD EVER FIT THIS SEAT.  *TR","products":[{"type":"Vehicle","productYear":"9999","productMake":"UNKNOWN","productModel":"UNKNOWN","manufacturer":"UNKNOWN MANUFACTURER"},{"type":"Child Seat","productYear":"9999","productMake":"DOREL","productModel":"SAFETY 1ST","manufacturer":"Dorel Juvenile Group"}]}]}