{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11015065,"manufacturer":"Harley-Davidson Motor Company","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"08/14/2017","dateComplaintFiled":"08/14/2017","vin":"1HD1CX3197K","components":"SERVICE BRAKES","summary":"I WAS RIDING MY STOCK 2007 HD SPORTSTER 1200 YESTERDAY ON A PAVED ROAD APPROX. 35 MPH WHEN I RAN OVER A ROUGH PORTION OF ROAD.  THE RIGHT FOOT PEG / REAR BRAKE PEDAL ASSEMBLY CAME OFF FROM ITS MOUNTING POSITION ON THE LOWER FRAME AND WAS DRAGGING ON THE ROAD.  I PULLED OVER TO DISCOVER THAT THE TWO BOLTS THAT HOLD THE BRACKET / ASSEMBLY TO THE FRAME HAD SHEARED OFF.  I WEIGH 185 LBS AND THE MOTORCYCLE DID NOT BOTTOM-OUT ON THE ROUGH ROAD, NOR DID THE BRAKE / FOOT PEG ASSEMBLY STRIKE THE ROAD.  THE BOLTS APPEAR TO HAVE SIMPLY SHEARED OFF FROM MY WEIGHT ON THE FOOT PEG ON A ROUGH PATCH OF ROAD.  LUCKILY, I MAINTAINED CONTROL OF THE MOTORCYCLE AND WAS ABLE TO STOP IT WITH NO USABLE REAR BRAKE AS THE CONTROL WAS DRAGGING ON THE ROAD.  I DID RESEARCH LAST NIGHT ON THE INTERNET AND READ SEVERAL POSTINGS ON A MOTORCYCLE BLOG WITH OWNERS OF 2007 SPORTSTER 1200 MOTORCYCLES THAT REPORTED EXACTLY THE SAME ISSUE, SO I AM REPORTING IT TO YOU.  THERE IS NO VISIBLE RUST ON THE BOLTS WHERE THEY SHEARED OFF.  THEY APPEAR TO BELOW-GRADE STEEL BOLTS THAT FAILED UNDER NORMAL USE.  I WAS LUCKY THAT I MAINTAINED CONTROL AS MY FOOT DROPPED TO THE GROUND AT 35 MPH - IT COULD HAVE BEEN MUCH WORSE.  PLEASE LET ME KNOW IF YOU HAVE RECEIVED SIMILAR COMPLAINTS AND IF THERE IS A RESOLUTION UNDERWAY.","products":[{"type":"Vehicle","productYear":"2007","productMake":"HARLEY-DAVIDSON","productModel":"XL1200L","manufacturer":"Harley-Davidson Motor Company"}]}]}