{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11337787,"manufacturer":"General Motors, LLC","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"07/03/2020","dateComplaintFiled":"07/06/2020","vin":"1G1ZC5E16BF","components":"EXTERIOR LIGHTING","summary":"THE LOW BEAM HEADLIGHTS ON MY VEHICLE BURN OUT AND NEED TO BE REPLACED EVERY 3-4 MONTHS (3-4 TIMES PER YEAR FOR THE LAST 6 YEARS I HAVE OWNED THE VEHICLE). THIS IS NOT ONLY AN EXPENSIVE REPAIR (BECAUSE MY MECHANIC NEEDS TO REMOVE THE BUMPER IN ORDER TO COMPLETE IT), BUT EXTREMELY DANGEROUS. MULTIPLE TIMES MY HEADLIGHTS HAVE SUDDENLY STOPPED WORKING AT NIGHT WITHOUT WARNING. SOMETIMES PULLING OVER AND HITTING THE HEADLIGHT ASSEMBLY WILL CAUSE IT TO HAVE A BETTER CONNECTION AGAIN, CAUSING THE LIGHTS TO WORK, BUT THIS FIX IS ONLY TEMPORARY. THE CONNECTORS KEEP MELTING, MY MECHANIC AND I NOW BELIEVE, DUE TO THE HIGH AMPERAGE CAUSED BY THE 70% REDUCTION IN POWER DURING THE VEHICLE'S DAYTIME RUNNING LIGHT MODE. MY COMPLAINTS TO THE MANUFACTURER HAVE GONE UNHEARD. IT IS CLEAR THAT THE MANUFACTURER NEEDS TO PROVIDE FOR A HEAVIER CONNECTOR THAN THE OEM PART, AND PERHAPS DIFFERENT BULBS, TO REMEDY THIS SAFETY ISSUE. IN THE YEAR 2020 IT SHOULD NOT BE SO DIFFICULT TO KEEP BOTH LOW BEAM HEADLIGHTS RUNNING! I CAN GET AROUND THE ISSUE BY USING MY HIGH BEAM LIGHTS, BUT THIS IS HAZARDOUS TO OTHER MOTORISTS. IT IS A POOR DESIGN, AND I AM CONVINCED THAT THERE WILL NOT BE A SATISFACTORY FIX FOR THIS SAFETY ISSUE UNTIL NHTSA COMPELS GM TO ISSUE A RECALL.","products":[{"type":"Vehicle","productYear":"2011","productMake":"CHEVROLET","productModel":"MALIBU","manufacturer":"General Motors, LLC"}]}]}