{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11448468,"manufacturer":"Polestar Automotive USA, Inc.","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"01/20/2022","dateComplaintFiled":"01/22/2022","vin":"LPSED3KA8NL","components":"SERVICE BRAKES","summary":"The rear brake pads on Polestar 2s (P2) are susceptible to adhering to the rotors, causing a juddering noise from some of the pad breaking off and left stuck on the rotors. This appears to happen in wet climates, after its driven in the rain, after the wheels are cleaned with water, or stored in a humid space. Typical symptoms are: (a) the morning after the pads are exposed to water or excessive humidity, the brakes makes a loud THUD noise when initially moving it out of standstill; (b) it then proceeds with a low-pitched grinding noise coming from the wheels, and then goes away after a few seconds.If the grinding noise persists, turns into a sound similar to having a flat tire, and eventually turning into a repetitive judder noise when either applying the brakes or quickly releasing the accelerator when OPD, there's a good chance you have this issue.  Cause: A high percentage of the brake pads' material consists of metal with an outer metal coating that helps with break in and corrosion. These pads create significantly more brake dust, which coats the rotors while driving. The metal in the dust adheres the pads to the rotors, especially when wet. The leftover thumping noise is brake pad material that broke off and remained on the rotor. It's possible the parking brake uses the same rear brakes. In this scenario, the brakes are essentially applied overnight, which further exacerbates the pad bonding to the rotors. At this moment, it's not possible to park your car without applying the parking brake.","products":[{"type":"Vehicle","productYear":"2022","productMake":"POLESTAR","productModel":"POLESTAR 2","manufacturer":"Polestar Automotive USA, Inc."}]}]}