{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11488634,"manufacturer":"Bombardier Recreational Products, Inc.","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"07/31/2022","dateComplaintFiled":"10/10/2022","vin":"2BXREDD27JV","components":"UNKNOWN OR OTHER","summary":"Shifting / stalling problems: 2018 F3L SE6 **Problem has occurred using each of my 2 Spyder keys   Problem definition:  At times, bike stalls while driving...begins shaking and remains in last gear prior to the stall. Gear shown in Display does not change from gear it was last in when bike stalled out.   Orange exclamation point ! (Vehicle Malfunction) appears on lower left corner of Display and the last gear the bike was in prior to stalling still appears on Display.  The gray banner, Transmission Fault also flashed quickly on Display for 2 of the 4 total fault occurrences.       This happened when I was traveling in higher gears, approx. RPM at 3900-4200, as in 3rd, 4th, 5th or 6th gear.  It stalls with no power to throttle and loss of shifting.  **What I do to clear error – so far:  Pull off road, turn bike key off, wait a few minutes, remove / reinsert key.  Sometimes had to do the re-start procedure 2-3 times before display error clears.  ONLY if Display error is cleared do I have power on the engine.  Sometimes can start bike with error still in display, but have NO POWER from throttle to engine.    Stalling issues happened to me: 7/31/22, 08/04/22, 08/17/22. Dealer duplicated issue - see invoices.   BRP Can-Am:  had dealer \"reprogram\"? or update the VCM, and to clean the HCM.","products":[{"type":"Vehicle","productYear":"2018","productMake":"CAN-AM","productModel":"SPYDER F3","manufacturer":"Bombardier Recreational Products, Inc."}]}]}