{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11503683,"manufacturer":"Kia America, Inc.","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"01/08/2023","dateComplaintFiled":"01/25/2023","vin":"5XYP6DHC8NG","components":"SERVICE BRAKES","summary":"Rear driver's side wheel speed sensor began to fail intermittently at 10K miles (confirmed and replaced under warranty by dealership, no longer have access to the failed part but can provide dealer contact info).  This failure resulted in braking not working correctly \u2013 presumably ABS system would read a 0 RPM reading from the one wheel, which then led to ABS triggering at maximum strength for all wheels. The first time this occurred I was approaching a stop sign at approximately 20 MPH on dry pavement and was entirely unable to stop, rolling approximately 50 feet before the computer disabled ABS entirely and I was able to use mechanical brakes to stop. (In subsequent incidents I triggered the same failure in my driveway at extremely low speeds before getting onto a public road.)  The following dashboard lights came on after each incident: Auto Hold, Auto Stop-Start, Forward Collision Assist, ABS, Traction Control, and Master Warning. No lights were on prior to brake failure.  While the computer registered that the wheel speed sensor was not working mechanical brakes worked correctly (albeit with no stability control or ABS). However, occasionally the system would reset (after turning off / on the vehicle enough times or driving enough distance) at which point dashboard warning lights would turn off and brakes would again stop working reliably (ABS would trigger prematurely).  My experience appears to not be an isolated incident: https://www.kiatelluride.org/threads/brakes-failing.1653/.  Proposed fix: If wheel speed sensor is sending no data, ABS computer should fail open (assume the wheel is turning unless data from the sensor explicitly indicates otherwise). If the sensor is unable to differentiate between no signal and 0 RPM it should be re-engineered.","products":[{"type":"Vehicle","productYear":"2022","productMake":"KIA","productModel":"TELLURIDE","manufacturer":"Kia America, Inc."}]}]}