{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11539006,"manufacturer":"Chrysler (FCA US, LLC)","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"08/09/2023","dateComplaintFiled":"08/16/2023","vin":"1C4HJWFG7HL","components":"SERVICE BRAKES","summary":"A check engine light came on and when diagnosed  it was the Electronic Vacumn Pump which runs the braking system.  I see there is a TSB from FCA (Fiat Chrysler Automobiles) about this problem..  Case Number: S1805000006 Release Date: 02/24/2020 Symptom/Vehicle Issue: ESC Light Illuminated. DTC C1252-92 VACUUM PUMP CONTROL CIRCUIT And Or P258B ELECTRONIC VACUUM PUMP PERFORMANCE Discussion: If ABS has C1252-92 Active or Stored do not replace the brake system module (ABS). PCM may also have set P258B-00. The faults are pointing to vacuum pump system having an issue maintaining vacuum levels. Please check the vacuum pump operation, fusing, wiring, and connector for proper functionality. Poor connections, spread pins, damaged connectors are possible causes. Perform the diagnostic for the DTC P258B regardless if it is set or not, since it is more compressive of a test than C1252-92. In addition when checking Vacuum lines, please ensure to check Vacuum hoses and check valves between the engine intake, booster and vacuum pump. Because the check valves only allow flow of air on one direction, each vacuum circuit must be checked separately to make sure there are no leaks, kinks or damages. Please refer to the correct vacuum diagram. For KL vehicles: inspect ALL under hood grounds for connection and contact issues. My Jeep is at the Ford Dealership I work at at this time.  Didn't want to drive any farther than I had to at this time.","products":[{"type":"Vehicle","productYear":"2017","productMake":"JEEP","productModel":"WRANGLER","manufacturer":"Chrysler (FCA US, LLC)"}]}]}