{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11561104,"manufacturer":"Tesla, Inc.","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"04/10/2023","dateComplaintFiled":"12/20/2023","vin":"5YJ3E1EA1LF","components":"LANE DEPARTURE","summary":"An incident occurred in April of 2023 while running FSD Beta 11.3.6 firmware. I have been unable to retest this location on more recent software, so this concern may have been mitigated with a subsequent update. As seen in the video, the yellow lane marking on the left transitioned from the roadway up onto the movable center median. Once on the bridge, the left repeater camera and the center display visualization both illustrate the lane centering was definitely biased towards the left side of the lane, a possible indication the vision-based lane centering was miscued by the yellow line now appearing on the barrier instead of the road surface. This left bias brought the vehicle uncomfortably close to the barrier, which resulted in a manual takeover. It is difficult to judge based on the low resolution of the repeater camera view,  but my estimation is that the tires were approximately 12 inches away from the protruding bottom lip of the barrier.  [XXX]   This same left lane marking concern also occurs at the entrance to the Oakland, California Caldecott tunnel eastbound bore. The Google maps link provided shows the yellow line which defines the left lane edge disappears at the tunnel entrance, at which time the vision-based lane centering seemed to be cuing off of the curb as the lane edge, rather than there being a marking that would delineate a lane edge further away from the curb. An FSD beta user (name and date unavailable) reported contacting the curb at this location at approximately the same date as the GGB recording. [XXX]   The GGB matter was brought to the attention of the Bay Area Toll Authority with the suggestion they contact Tesla. I have been unable to verify that the Toll Authority followed up on that suggestion. The release notes for Beta 11.4.4 suggest the issue might have been addressed, to wit, \"Improved offset consistency when controlling for static obstacles.\" INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)","products":[{"type":"Vehicle","productYear":"2020","productMake":"TESLA","productModel":"MODEL 3","manufacturer":"Tesla, Inc."}]}]}