{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11578450,"manufacturer":"General Motors, LLC","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"01/15/2024","dateComplaintFiled":"03/20/2024","vin":"1GT58LE7XRF","components":"UNKNOWN OR OTHER","summary":"GMC has a problem with the electronic brake controller on their 2024 Sierra 2500HD and 3500Hd trucks.  All trailers are required to have trailer brakes. In addition the trailer must be equipped with  an auxillary battery to activate the emergency breakaway brakes.  If the voltage on this battery is higher than the towing vehicle battery, the  vehicle controller  can display a trailer wiring fault display.  When this happens there are no brakes on the trailer.  This fault happens intermittantly  and can last between 10 seconds to 30 seconds.  We constantly have this problem with our vehicle.  On two occasions we were in an emergency situation towing  a12,500 lb  load and had no brakes.  This is A SEVERE SAFETY CONCERN.  The GMC dealer stated that the problem is  because our trailer uses a regular car battery to work the  hydraulics and the brakes.  They stated that the controller pings the trailer to see is anything is connected and  that the car battery can interfear  with this signal.  When this signal does not return the controller senses that no trailer is connected and  disables the trailer brakes.  The trailer that we have is new and it is wired according to industry standards.  Thre are thousands of trailers on the road that have this configuratiion.   We have inspected the trailer and cannot find wiring problems.  We have towed the same tyrailer with two different trucks and do not have this problem.  A quick search on the internet will reveal that many other people are experiencing the same problem.","products":[{"type":"Vehicle","productYear":"2024","productMake":"GMC","productModel":"SIERRA 2500","manufacturer":"General Motors, LLC"}]}]}