{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11696119,"manufacturer":"General Motors, LLC","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"10/26/2025","dateComplaintFiled":"10/28/2025","vin":"1GKS2KKL1RR","components":"EXTERIOR LIGHTING","summary":"ChatGPT said:  There is a design flaw with the automatic light function.  When you turn the knob to disable the automatic lights to avoid blinding someone while parked, the knob returns to the auto position as expected. This is a good system to ensure that the next time you start the car, the lights are in auto again.  The issue is with the way the system indicates what is happening to the driver.  When the lights are set to auto, the \u201cauto\u201d indicator on the knob is illuminated. If you turn the knob to running lights or full lights, the corresponding indicator lights up as expected.  However, when you turn the lights off, the indicator light returns to \u201cauto\u201d even though the lights are actually off. While the physical knob should return to auto to make sure the system resets properly at the next startup, the indicator should switch to the \u201coff\u201d position so the driver knows the lights are off.  I drove off in the city and assumed my lights were on because the knob said auto, but I later realized they were off. This creates a serious safety hazard. There is no way to know in that situation if your lights are actually on by looking at the knob unless you cycle the lights again. A recall should be issued to change the software or replace the button to make sure that this is clear to the driver.","products":[{"type":"Vehicle","productYear":"2024","productMake":"GMC","productModel":"YUKON XL","manufacturer":"General Motors, LLC"}]}]}