{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11712360,"manufacturer":"Nissan North America, Inc.","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"01/20/2026","dateComplaintFiled":"01/21/2026","vin":"1N4AZ1CP8JC","components":"SERVICE BRAKES,FUEL/PROPULSION SYSTEM","summary":"This vehicle is equipped with a feature known as \"e-pedal\" also known as one-pedal driving which is quite common on EVs. When this mode is activated, the accelerator pedal acts as a speed command (vs. power) and when the pedal is not depressed, the vehicle applies brakes until it comes to a standstill. Recently, the system has demonstrated a fault condition, where the Vehicle Control Module (VCM) issues a fault warning and disengages the e-pedal mode. This appears to occur randomly after the vehicle has been at a standstill for over one minute (e.g. waiting at a traffic signal) where the driver is using the one-pedal system vs. continuously applying pressure to the brake pedal.  The safety issue is that when the system detects a fault and disengages e-pedal, the vehicle starts to move forward, requiring the driver to take immediate action to stop unwanted motion. This can lead to a collision with a vehicle or pedestrian in front of the vehicle.  The desired behavior is that when the VCM detects a fault with the e-pedal system, it should engage the Park mode and prevent the vehicle from moving forward. The driver must then depress the brake pedal and affirmatively command the Drive mode before moving.   Just disengaging the e-pedal (brake) without prior warning of a fault is a safety hazard.","products":[{"type":"Vehicle","productYear":"2018","productMake":"NISSAN","productModel":"LEAF","manufacturer":"Nissan North America, Inc."}]}]}