{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11727766,"manufacturer":"Nissan North America, Inc.","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"03/25/2026","dateComplaintFiled":"03/29/2026","vin":"1N6ED1EK4PN","components":"SERVICE BRAKES,FORWARD COLLISION AVOIDANCE","summary":"Vehicle Year/Make/Model: 2023 Nissan Frontier  Defect Description: The wiring harness connected to the brake stop lamp switch on 2023 Nissan Frontier vehicles contains a design or manufacturing defect that causes premature switch failure. The defect results in the switch overheating and burning out, evidenced by visible charring and sooty residue inside the switch housing. Upon failure, the brake lights may not illuminate when the brake pedal is depressed, removing a critical safety signal for following drivers.  Nissan has acknowledged this defect and issued Technical Service Bulletin NTB22-084. However, owners whose vehicles have exceeded the 36,000-mile bumper-to-bumper warranty threshold are required to bear the full cost of repair out of pocket, despite the defect being a known manufacturing issue.  Safety Hazard: Failure of the brake stop lamp switch renders the vehicle's rear brake lights inoperative. This creates a significant safety risk to the vehicle's occupants, following drivers, and the general public \u2014 particularly under low-visibility conditions such as nighttime driving, inclement weather, or high-traffic situations.  In my personal incident, switch failure occurred without prior warning while traveling at approximately 50 mph on a state highway. A warning light did illuminate, but only after the switch had already failed. At that speed and location, safely moving off the roadway was not immediately possible, placing myself and other motorists in a hazardous situation.","products":[{"type":"Vehicle","productYear":"2023","productMake":"NISSAN","productModel":"FRONTIER","manufacturer":"Nissan North America, Inc."}]}]}