{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11761548,"manufacturer":"Honda (American Honda Motor Co.)","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"08/31/2026","dateComplaintFiled":"09/02/2026","vin":"5J6RE483X7L","components":"STRUCTURE","summary":"Vehicle Affected: 2007 Honda CR-VRelated Recall: NHTSA Recall Campaign Number 23V228000 (Rear Frame Stiffener Brackets)Description of Incident:I am reporting a severe safety issue regarding how a Honda dealership and American Honda Motor Co. are executing Safety Recall 23V228. I presented my vehicle to an authorized Honda dealer for the rear frame rust inspection. (Lundgren Honda of Auburn MA) The technician \"passed\" the vehicle and offered to install the remedy support brace because the specific trailing arm bolt hole could technically receive a bolt. However, the dealer completely ignored a catastrophic structural failure directly adjacent to the recall site. The actual boxed structural frame rail just one inch above the bolt hole has completely disintegrated, leaving giant holes and heavily flaking, hollowed-out metal. Per Honda's official recall service bulletin instructions, the reinforcement brace must be securely anchored to structurally sound frame metal. Slapping a bracket onto a tiny piece of metal while the supporting frame rail above it is entirely gone creates an extreme liability and does not fix the safety risk of a suspension collapse. I contacted Honda Corporate Customer Support to escalate this. Despite providing clear photographic proof that the structural integrity of the frame rail is gone, Honda is giving me severe pushback and delaying action on my open case file. They are ignoring a severe structural failure at the exact recall site to avoid their legal obligation for a vehicle buyback. The vehicle remains an immediate highway hazard. I have attached photographic evidence showing the gaping hole in the frame rail directly next to the recall bolt location. The car would not pass a safety inspection from a MA State inspection facility, and they refused to sticker it, or put tires on it....","products":[{"type":"Vehicle","productYear":"2007","productMake":"HONDA","productModel":"CR-V","manufacturer":"Honda (American Honda Motor Co.)"}]}]}