{"count":1,"message":"Results returned successfully","results":[{"odiNumber":11771445,"manufacturer":"Honda (American Honda Motor Co.)","crash":false,"fire":false,"numberOfInjuries":0,"numberOfDeaths":0,"dateOfIncident":"10/06/2026","dateComplaintFiled":"10/15/2026","vin":"1HGCY2F64RA","components":"ELECTRICAL SYSTEM","summary":"1. The service center diagnosed the BCM as faulty. I do not have the faulty part available as it was replaced. Service center work notes: Vehicle no start confirmed, battery voltage is at 12.4V. Vehicle has message on dash to touch key to ignition start stop button, with no success. Proceeded to inspect all main fuses to under hood fuse box, found all fuses are good main 175 amp fuse is ok, along with all four multi fuses. Proceeded to follow troubleshooting for message displayed on dash, tested key fob for unlock and lock functions, tested start stop button functions with no issues. Checked fuses that power is at each supply pin, pin 1 on connector a has 12.2v and pin 18 12.3v. Used the ground from connector pin 51 while testing voltage on previous pins to confirm ground is good. It is suspected that bcm has a internal failure and will need to be checked with known good unit, reprogrammed and retest to confirm vehicle will start. 2. The car in the faulty condition had no noticeable difference from one with a low battery so I tried to jump start the vehicle per the owners manual. This put me at a significant fire risk of over charging the battery. 3. Unknown if the manufacturer, insurance or police inspected it. 4. No warning lamps prior to failure. Dash was entirely blank other than aforementioned instruction about the key fob.","products":[{"type":"Vehicle","productYear":"2024","productMake":"HONDA","productModel":"ACCORD","manufacturer":"Honda (American Honda Motor Co.)"}]}]}