{"Count":7,"Message":"Results returned successfully","results":[{"Manufacturer":"MACK TRUCKS, INCORPORATED","NHTSACampaignNumber":"90V010000","parkIt":false,"parkOutSide":false,"overTheAirUpdate":false,"ReportReceivedDate":"23/01/1990","Component":"SUSPENSION:REAR:SPRINGS:LEAF SPRING ASSEMBLY","Summary":"THE 7/8 INCH SPRING EYE BOLTS WITHIN THE SPRING EYE BUSHING HANGER BRACKET OF THE REAR SUSPENSION MAY FAIL.","Consequence":"THE SPRING COULD FALL ONTO THE ROAD SURFACE, WITHOUT WARNING TO THE DRIVER, AND A VEHICLE CRASH COULD OCCUR DUE TO THE SUDDEN DRAG OF THE SPRING.","Remedy":"REPLACE ALL 7/8 INCH DIAMETER SPRING EYE BOLTS WITH 1 INCH DIAMETER BOLTS.","Notes":"SYSTEM: SUSPENSION; SPRING EYE BOLT.VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS WITH ST34 OR ST 38 REAR SUSPENSION.","ModelYear":"1985","Make":"MACK","Model":"MACK"},{"Manufacturer":"MACK TRUCKS, INCORPORATED","NHTSACampaignNumber":"89V022000","parkIt":false,"parkOutSide":false,"overTheAirUpdate":false,"ReportReceivedDate":"17/02/1989","Component":"SUSPENSION:REAR:SPRINGS:LEAF SPRING ASSEMBLY:U-BOLT, LEAF SPRING TO AXLE","Summary":"AN INCORRECT 3/4 INCH BOLT WAS INSTALLED ON RT/RS 450 SUSPENSION.","Consequence":"THIS BOLT MAY BREAK, CAUSING DISENGAGEMENT OF THE BEAM\nCONNECTION OF REAR SUSPENSION, RESULTING IN LOSS OF CONTROL, WHICH COULD \nRESULT IN AN ACCIDENT.","Remedy":"RETROFIT CHASSIS WITH 1 INCH BOLTS.","Notes":"SYSTEM: SUSPENSION.VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS BUILT WITH HENDRICKSON RT/RS 450SUSPENSION.","ModelYear":"1985","Make":"MACK","Model":"MACK"},{"Manufacturer":"MACK TRUCKS, INCORPORATED","NHTSACampaignNumber":"87V010000","parkIt":false,"parkOutSide":false,"overTheAirUpdate":false,"NHTSAActionNumber":"PE87005","ReportReceivedDate":"09/02/1987","Component":"SUSPENSION:REAR:SPRINGS:AIR SUSPENSION SYSTEM","Summary":"CROSSMEMBER CAN BE OVERSTRESSED AND CAN FAIL, ALLOWING THE BROKEN CROSSMEMBER TO PROTUDE ABOVE THE TOP OF THE FRAME AND INTERFERE WITH CHASSIS COMPONENTS.","Consequence":"TRAILER HANDLING COULD BE AFFECTED DURING TURNINGMANEUVERS WHICH COULD RESULT IN LOSS OF TRUCK CONTROL AND A CRASH.  ALSO, ACOMPLETELY SEPARATED CROSSMEMBER COULD AFFECT HEIGHT OF SUSPENSION AIR SPRINGSAND THE RESULTING LEAN COULD RESULT IN LOSS OF CONTROL.","Remedy":"INSTALLATION OF A BOLTED DOUBLE PLATE TYPE CROSSMEMBER TO REPLACE THE STANDARD CHANNEL TYPE CROSSMEMBER.","Notes":"SYSTEM: REAR CROSSMEMBER WITH NEWAY AIR SUSPENSION.VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS:DM,F,FM,MC,MCE,MH,MR,R,RD,RS,RL,RW,RWL,RWS AND U MODELS EQUIPPED WITH NEWAY AIRRIDE DRIVE AXLE SUSPENSION.","ModelYear":"1985","Make":"MACK","Model":"MACK"},{"Manufacturer":"MACK TRUCKS, INCORPORATED","NHTSACampaignNumber":"86V040000","parkIt":false,"parkOutSide":false,"overTheAirUpdate":false,"ReportReceivedDate":"10/03/1986","Component":"SUSPENSION:FRONT:WHEEL BEARING","Summary":"FRONT STEERING KNUCKLE THRUST BEARING MAY SHATTER INTO    PIECES DUE TO IMPROPER HEAT TREATMENT.                                                                                                                            CONSEQUENCE OF DEFECT: FAILURE OF THE BEARING MAY AFFECT STEERING CONTROL.  IF   BEARING DISINTEGRATES, IT WOULD RESULT IN INCREASE STEERING DRAG AND/OR CAUSE    STEERING LOCK UP WITH LOSS OF CONTROL WHICH COULD LEAD TO AN ACCIDENT.","Consequence":null,"Remedy":"REPLACE DEFECTIVE THRUST BEARINGS.","Notes":"SYSTEM: STEERING KNUCKLE.                                                                                                                                       VEHICLE DESCRIPTION: ALL MODELS EQUIPPED WITH A FA536, FA537, OR FA538 SERIES   FRONT STEERING AXLE.","ModelYear":"1985","Make":"MACK","Model":"MACK"},{"Manufacturer":"MACK TRUCKS, INCORPORATED","NHTSACampaignNumber":"86V009000","parkIt":false,"parkOutSide":false,"overTheAirUpdate":false,"ReportReceivedDate":"22/01/1986","Component":"SUSPENSION:REAR:SPRINGS:LEAF SPRING ASSEMBLY","Summary":"THE SPRING EYE BOLT WAS NOT TORQUED PROPERLY AND COULD    FAIL DUE TO THE LOOSE FIT WITHIN THE SPRING EYE BUSHING/HANGER BRACKET.                                                                                           CONSEQUENCE OF DEFECT: THE SPRING COULD FALL ONTO THE ROAD SURFACE, WITHOUT      WARNING TO THE DRIVER, AND A VEHICLE CRASH COULD OCCUR DUE TO THE SUDDEN DRAG    OF THE SPRING.","Consequence":null,"Remedy":"NOT AVAILABLE AT THIS TIME.  IN THE INTERIM THE TORQUE OF     THE SPRING EYE BOLT WILL BE CHECKED.","Notes":"SYSTEM: SPRING EYE BOLT.                                                                                                                                        VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS WITH ST34 OR ST38 SERIES REAR AXLE.","ModelYear":"1985","Make":"MACK","Model":"MACK"},{"Manufacturer":"MACK TRUCKS, INCORPORATED","NHTSACampaignNumber":"86V005000","parkIt":false,"parkOutSide":false,"overTheAirUpdate":false,"ReportReceivedDate":"14/01/1986","Component":"POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT","Summary":"INCORRECT INNER WHEEL BEARINGS WERE INSTALLED IN THE      REAR AXLES WHICH WEARS A GROOVE IN THE SPINDLE DUE TO A POOR FIT.                                                                                                 CONSEQUENCE OF DEFECT: A DEEP GROOVE COULD CAUSE THE AXLE HOUSING TO BREAK AND   RESULT IN A VEHICLE CRASH WITHOUT PRIOR WARNING.","Consequence":null,"Remedy":"REPLACE INNER WHEEL BEARING WITH CORRECT BEARING.  ALSO, IF   A GROOVE IS PRESENT, REMOVE THE GROOVE AND ASSURE THAT NO CRACKS ARE PRESENT.    REPLACE HOUSING IF CRACKED.","Notes":"SYSTEM: REAR AXLE INNER BEARING.                                                                                                                                VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH MACK SS440C OR SW440C REAR AXLE.","ModelYear":"1985","Make":"MACK","Model":"MACK"},{"Manufacturer":"MACK TRUCKS, INCORPORATED","NHTSACampaignNumber":"88V126000","parkIt":false,"parkOutSide":false,"overTheAirUpdate":false,"ReportReceivedDate":"28/07/1988","Component":"SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS","Summary":"SOME AIR BRAKE HOSE ASSEMBLIES MAY NOT COMPLY WITH BURST STRENGTH REQUIREMENTS OF FMVSS 106.","Consequence":"VEHICLES DO NOT COMPLY WITH STANDARD.","Remedy":"REPLACE SUSPECT HOSE ASSEMBLIES.","Notes":"SYSTEM: AIR BRAKE HOSE ASSEMBLY/FMVSS 106.VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS.","ModelYear":"1985","Make":"MACK","Model":"MACK"}]}